Roofing Systems in Fort Lauderdale, FL
Fort Lauderdale sits inside Florida’s High-Velocity Hurricane Zone, the state’s strictest roofing code. We install and repair roofing built to HVHZ requirements and ready to carry solar.
Broward County · Roofing Systems
Get a free roofing quote for Fort Lauderdale
Tell us about your roof and we’ll recommend the right material and timeline, whether solar is part of the plan or not.
- Shingle, tile, metal, flat/foam, slate & synthetic
- HVHZ-rated to Broward County code
- City of Fort Lauderdale permitting handled for you
Request Your Free Property Energy Efficiency Evaluation
See how much you could save with a customized property energy assessment.
Solar and insulation depend on what’s underneath
Fort Lauderdale’s roughly 183,000 residents live under some of the strictest roofing requirements in the country. Broward County, along with Miami-Dade, is designated a High-Velocity Hurricane Zone (HVHZ) under the Florida Building Code — a roof that isn’t installed to HVHZ standard can shorten the life of anything installed on top of it, including solar racking.
HVHZ-rated installation
Installed to Broward County’s High-Velocity Hurricane Zone fastening and impact-resistance standards.
Solar-ready structure
Framing and fastening sized to carry racking loads whether solar goes on now or later.
Energy efficiency
Proper roofing reduces heat transfer into the home, easing the load on your HVAC system.
Roofing systems we install in Fort Lauderdale
We install shingle, tile, metal, flat/foam, slate, and synthetic roofing, all selected and installed to meet HVHZ product approval (NOA) requirements. Tile and metal are the most common choices in Fort Lauderdale given the county’s stricter fastening and impact-resistance standards — metal in particular has become popular with homeowners planning solar, since its 40-50 year lifespan typically outlasts the solar system it supports and avoids a costly re-roof mid-warranty. Shingle roofing remains available and HVHZ-rated shingle products exist, though it’s chosen less often here than in non-HVHZ counties. We also handle roof repairs short of a full replacement — storm damage patching, flashing repair around chimneys and vents, and addressing isolated leaks — for homeowners who need the existing system stabilized and watertight without a full re-roof.
Flat and foam roofing systems are common on additions, garages, and low-slope sections of Fort Lauderdale homes near the coast, offering waterproofing and insulation in one system.
What HVHZ means for your Fort Lauderdale roof
The High-Velocity Hurricane Zone designation requires every roofing product installed in Broward County to carry a Notice of Acceptance (NOA) or Miami-Dade County product approval, confirming it’s been tested to withstand HVHZ wind and impact loads. Fastening schedules are denser than standard Florida wind code, underlayment must meet enhanced water-intrusion standards, and permit review generally includes closer scrutiny of the submitted product documentation. This is stricter than what applies just north in Palm Beach County, and it’s a distinction we account for automatically since we’re licensed and actively installing across both counties. We also review secondary water barriers and roof-to-wall connections during every Fort Lauderdale inspection, since HVHZ code places extra emphasis on the structural load path from the roof deck down to the foundation, not just the surface material itself. A self-adhering, high-wind-rated underlayment is standard on every roof we install here, regardless of the finished material, since it’s the layer that actually keeps a home watertight if shingles or tiles are compromised in a storm.
What the City of Fort Lauderdale requires
Re-roofs and roof repairs are permitted through the City of Fort Lauderdale Building Department.
Roofing permit
Required for any full or partial re-roof, including HVHZ product approval documentation for the specific materials used.
HOA approval
Many Fort Lauderdale communities require architectural review for material and color before work starts — we help you navigate this.
Final inspection
A city inspector signs off on the completed roof before the permit closes.
Signs your Fort Lauderdale roof needs attention
Curling, cracked, or missing shingles; tile that has slipped out of alignment after a storm; granule buildup in gutters; visible sagging in the roof deck; and water stains on interior ceilings are the most common signs we see on Fort Lauderdale inspections. Because HVHZ roofs take routine wind and UV exposure along the coast, damage often shows up gradually rather than all at once, which is why we recommend a professional inspection after any named storm passes near Broward County, even if nothing looks obviously wrong from the ground. Homes closer to the Intracoastal and beach corridor see faster wear on flashing and edge details due to salt air, so we inspect those areas more closely on coastal properties. Coastal Fort Lauderdale properties within a mile or two of the beach also see faster corrosion on exposed metal fasteners and flashing, so we spec stainless or coated hardware on those installs rather than standard galvanized fasteners.
Age matters too. Shingle roofs typically need replacement around 15-20 years in Florida’s climate, tile can last 30-50 years with proper underlayment maintenance, and metal roofing regularly reaches 40-50 years. If your roof is approaching the end of its expected lifespan and you’re also considering solar, that’s the ideal time to plan both projects together.
Roofing and solar, handled together
When a Fort Lauderdale roof is nearing the end of its life and solar is also on the table, we evaluate both at once. Timing a re-roof ahead of a solar installation avoids removing and reinstalling panels a few years later, which adds labor cost and downtime. If your existing roof still has years of life left, we’ll tell you honestly rather than push an unnecessary replacement — our RE-CHECK certified specialists are evaluated on accuracy of recommendations, not sales volume.
Cost, insurance, and financing
Roofing cost in Fort Lauderdale varies by material and roof size, and HVHZ-approved products generally carry a premium over standard Florida wind-code materials due to the additional testing and fastening required. We provide a written estimate broken out by material option during your free evaluation. Florida homeowners insurance carriers increasingly scrutinize roof age when writing or renewing policies, and some won’t insure a roof older than 15-20 years regardless of condition — a documented HVHZ-compliant replacement with permit records and NOA paperwork can make a real difference in securing coverage or a better premium. We also work with financing partners offering fixed monthly plans so a roof replacement doesn’t have to be paid in full upfront.
Warranty coverage
Roofing materials we install carry manufacturer warranties that vary by product, typically ranging from 25 years on architectural shingles to lifetime warranties on premium tile and metal systems, and we back our own workmanship with a separate installation warranty. All warranty and NOA documentation is registered on your behalf and provided at project closeout, along with photos of the completed work — useful if you sell the home or file an insurance claim after a future storm.
Serving Fort Lauderdale and nearby Broward County
Our Fort Lauderdale roofing crews also serve Pembroke Pines, Hollywood, and Miramar, so warranty support and repair calls stay local to Broward County. If you’re just outside city limits, use the quote form above and we’ll confirm coverage for your ZIP code.
Roofing questions, answered
Do I need a new roof before installing solar in Fort Lauderdale?
Not always. We inspect your existing roof’s material, age, and remaining lifespan during your evaluation. If it won’t outlast the solar system’s 25-30 year warranty, we recommend replacement first so panels aren’t removed and reinstalled a few years later, which adds unnecessary labor cost.
What roofing materials do you install in Fort Lauderdale?
We install shingle, tile, metal, flat/foam, slate, and synthetic roofing systems, matched to Broward County’s High-Velocity Hurricane Zone requirements and your home’s structure, budget, and whether solar will be added. Tile and metal are the most common choices given the stricter fastening and impact standards here.
Does Fort Lauderdale require a wind-rated roof?
Yes, and the requirements are stricter than most of Florida. Broward County, along with Miami-Dade, is part of the state’s official High-Velocity Hurricane Zone (HVHZ) under the Florida Building Code, which mandates enhanced fastening, impact-resistant materials or coverings, and product approvals (NOA) beyond standard Florida wind code. We pull permits and install to HVHZ standards on every Fort Lauderdale project.
How long does a roof replacement take in Fort Lauderdale?
A typical residential re-roof takes one to three days for the tear-off and installation once permits are issued, depending on roof size and material. Permit review time through the City of Fort Lauderdale Building Department is the bigger variable, and HVHZ product approval documentation can add extra review time compared to non-HVHZ counties.
Can my new roof support solar panels?
Yes, that’s part of why we handle roofing and solar together. We size the roofing system’s structure and fastening to support racking loads from day one, so if you add solar now or later, the roof doesn’t need modification to carry the panels.
Will a new roof help lower my Fort Lauderdale homeowners insurance premium?
Often, yes. Many Florida insurers offer better rates or renewal terms for roofs under a certain age, particularly HVHZ-compliant roofs rated for high wind and impact resistance. We provide the permit and NOA documentation you’d need to submit to your insurer after a replacement.