Aerial view of black-on-black solar panels on a dark roof of a Florida home with palm trees

The Clean Power Experts · Florida Energy Guides

How Does Solar Work With Keys Energy Services?

Short answer: your system connects to the grid through Keys Energy Services’s own interconnection process, and what you are credited for exported energy is set by Keys Energy Services rather than by a single statewide rate.

Quick answer: Going solar on Keys Energy Services service normally means a local building and electrical permit, a local inspection, an interconnection application with Keys Energy Services, a meter change, and then written permission to operate before the system can legally be switched on.

Keys Energy Services serves Key West and the Lower Keys. It is a municipal (city-owned) utility. Keys Energy Services is a public utility governed by an elected utility board, and installations in the Keys also face some of the strictest wind-load requirements in the state. This matters more than most homeowners expect. Rule 25-6.065, the Florida Public Service Commission rule that governs net metering, applies to investor-owned utilities. Municipal utilities are not bound by the bulk of it and set their own credit terms, system size caps and application requirements.

The Keys Energy Services sequence, step by step

Step What happens Who handles it
1. Design and engineering Plans drawn to your roof, wind-load zone and electrical service, sealed where the jurisdiction requires it Installer
2. Local permit Building and electrical permit submitted to your city or county Installer, on your behalf
3. Interconnection application Application and single-line diagram submitted to Keys Energy Services Installer, on your behalf
4. Installation Physical install of the array, racking, inverter and wiring Installer
5. Inspection Local inspector verifies the work matches the approved plans Building department
6. Meter and permission to operate Meter exchanged if required, then Keys Energy Services issues written permission to operate Keys Energy Services, coordinated by installer

What to check before you sign anything

  • Confirm who actually serves the address. Service territory boundaries in Florida rarely follow city limits, and neighbouring streets are sometimes on different utilities entirely. The utility on your bill is the one that matters, not the city you live in.
  • Ask what the export credit actually is. Keys Energy Services sets its own terms, and they can differ substantially from what an FPL or Duke customer would be quoted. Any installer modelling your savings should be using Keys Energy Services’s current terms, not a statewide average.
  • Check whether there is a size cap or a queue. Some utilities cap system size relative to your historical consumption, and some run programme caps that fill up. Both change what is worth installing.
  • Get the timeline in writing. Permitting and interconnection are almost always longer than the installation itself. A realistic schedule should show both separately.
  • Do not switch the system on early. Operating in parallel with the grid before the utility authorises it can void agreements and, in some cases, create a safety hazard for line crews.

What we handle for you

We prepare the engineered plans, pull the local permit, submit the Keys Energy Services interconnection paperwork, meet the inspector and follow the approval through to permission to operate, so you are not managing a building department and a utility at the same time.

See what solar and battery storage would actually do for your home

We will pull your last 12 months of utility data, model your real consumption, and show you exactly what a system would cost and produce — no obligation, no pressure.

Get My Free Energy Evaluation →

Frequently asked questions

Do I need Keys Energy Services’s approval to install solar?

Yes. Any system that can operate in parallel with the grid needs an approved interconnection agreement with Keys Energy Services before it is energised, in addition to your local building permit.

Who sets the credit for energy I export to the grid?

Keys Energy Services is a municipal (city-owned) utility, so it sets its own terms. The statewide rule that governs investor-owned utilities does not bind it, and the credit can differ from what an FPL or Duke customer receives.

How long does the Keys Energy Services process take?

It varies, and it is normally the longest part of the project rather than the installation. We give you a schedule that separates permitting, installation, inspection and utility approval so you can see where the time actually goes.

Does my installer handle the Keys Energy Services paperwork?

Yes. We complete and submit the interconnection application, the single-line diagram and the supporting documents, and we track it through to approval.

Am I definitely a Keys Energy Services customer?

Check the provider name on your most recent electric bill. Keys Energy Services serves Key West and the Lower Keys, but boundaries are irregular and neighbouring properties are sometimes served by a different utility.

Related guides

Leave a Reply

Your email address will not be published. Required fields are marked *

Thank you! Your request has been received. We will contact you shortly.

scroll to top